Hardware
Showing 1–24 of 40 results
-
Glue & Adhesives (6)
-
Hand Tools (10)
-
Insulation Paper (5)
-
LED Lights & Holders (12)
-
Plastic Enclosures (3)
-
Standoff / Spacer (4)
-
LED Lights & Holders
5-Pack of Warm White 5mm Square Mega SMD Chip LED’s
Please allow 3-5 days for shipping…
(0 reviews)$19.00 Add to cart -
LED Lights & Holders
5-Pack of Cool White 5mm Square Mega SMD Chip LED’s
Please allow 3-5 days for shipping…
(0 reviews)$19.00 Add to cart -
Insulation Paper
5M Roll / 40mm Width – Insulation Paper w/Adhesive Backing
Please allow 1-3 days for shipping.
(0 reviews)$5.95 Add to cart -
-
Glue & Adhesives
BSI-107 Insta-Cure + Gap Filling Medium Glue
Features And Benefits:
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1″ separations on one surface, then assemble the parts, letting the pressure spread the CA out.
(0 reviews) -
Glue & Adhesives
BSI-108 Insta-Cure + Gap Filling Medium Glue
Features And Benefits:
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1″ separations on one surface, then assemble the parts, letting the pressure spread the CA out.
(0 reviews) -
Hardware
Hammond (1554CGY) Water Tight Polycarbonate & General Purpose ABS Enclosure
Please allow 3-5 days for shipping…
(0 reviews)$19.00 Add to cart -
Hand Tools
Vetus Stainless Steel ESD-10 Tweezers
Features And Benefits:
Description: Fully assembled Stainless Steel Tweezers Black ESD-10
(0 reviews)$2.49 Add to cart -
Hardware
White Nylon Plastic Standoff M3x5mm for Hex Female Screw
Additional Pictures Coming Soon.
(0 reviews)$0.29 Add to cart -
Insulation Paper
5M Roll / 50mm Width – Insulation Paper w/Adhesive Backing
Please allow 1-3 days for shipping.
(0 reviews)$6.95 Add to cart -
Hardware
Hammond (1591XXCSBK) ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs
Please allow 3-5 days for shipping…
(0 reviews)$7.00 Add to cart -
Hand Tools
Vetus Stainless Steel ESD-12 Tweezers
Features And Benefits:
Description: Fully assembled Stainless Steel Tweezers Black ESD-12
(0 reviews)$2.49 Add to cart -
Hardware
White Nylon Plastic Standoff M3x10mm for Hex Female Screw
Additional Pictures Coming Soon.
(0 reviews)$0.29 Add to cart -
Insulation Paper
5M Roll / 55mm Width – Insulation Paper w/Adhesive Backing
Please allow 1-3 days for shipping.
(0 reviews)$7.49 Add to cart -
Glue & Adhesives
BSI-102 Insta-Cure Super Thin Glue
Features And Benefits:
Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
(0 reviews) -
Hardware
Hammond (1591XXDSBK) ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs
Please allow 3-5 days for shipping…
(0 reviews)$9.00 Add to cart -
Hand Tools
Vetus Stainless Steel ESD-13 Tweezers
Features And Benefits:
Description: Fully assembled Stainless Steel Tweezers Black ESD-13
(0 reviews)$2.49 Add to cart -
Hardware
White Nylon Plastic Standoff M3x15mm for Hex Female Screw
Additional Pictures Coming Soon.
(0 reviews)$0.39 Add to cart -
Insulation Paper
5M Roll / 70mm Width – Insulation Paper w/Adhesive Backing
Please allow 1-3 days for shipping.
(0 reviews)$8.29 Add to cart -
Glue & Adhesives
BSI-161 Un-Cure Debonder CA Remover
Features And Benefits:
UN-CURE™ Debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option.
(0 reviews)$3.29 Add to cart -
Insulation Paper
5M Roll / 90mm Width – Insulation Paper w/Adhesive Backing
Please allow 1-3 days for shipping.
(0 reviews)$9.49 Add to cart -
Glue & Adhesives
BSI-151 Insta-Set Accelerator
Features And Benefits:
INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
(0 reviews) -
Hand Tools
Vetus Stainless Steel ESD-15 Tweezers
Features And Benefits:
Description: Fully assembled Stainless Steel Tweezers Black ESD-15
(0 reviews)$2.49 Add to cart